System Agent (Sa) Configuration - Asus DN-300-R2 Manual

CPU C8 Report [Enabled]
Allows you to disable or enable the CPU C8 report to OS. Configuration options:
[Enabled] [Disabled]
CPU C9 Report
This item allows you to disable or enable the CPU C9 report to the operating
system. Configuration options: [Enabled] [Disabled]
CPU C10 Report
This item allows you to disable or enable the CPU C10 report to the operating
system. Configuration options: [Enabled] [Disabled]
Package C State Limit
This item allows you to set the C-state limit for the CPU package.
Configuration options: [C0/C1] [C2] [C3] [C6] [C7] [C7s] [C8] [C9] [C10] [CPU
CFG Lock [Disabled]
This item allows you to enable or disable the CFG lock. Configuration
options: [Disabled] [Enabled]
3.3.3

System Agent (SA) Configuration

VT-d [Disabled]
Allows you to enable or disable VT-d function on MCH. Configuration options:
[Enabled] [Disabled]
Above 4G Decoding [Disabled]
Allows you to enable or disable the 4G decoding for 64-bit devices when the
system supports the 64-bit PCI decoding. Configuration options: [Enabled]
[Disabled]
Memory Configuration
Memory Remap [Enabled]
Allows you to enable or disable remapping the memory above 4GB.
Configuration options: [Disabled] [Enabled]
Graphics Configuration
Allows you to select a primary display from iGPU, and PCIe graphical devices.
Primary IGFX Boot Display [BIOS Default]
Select the Video Device to be activated during POST. Your selection does
not take effect if you have installed an external graphics device. Secondary
boot display selection will appear based on your selection. VGA modes
can be supported only on the primary display. Configuration options: [BIOS
Default] [USB-C] [Disp.2] [Disp.1] [VGA]
Primary Display [Auto]
Allows you to select which of the iGPU/PCIE Graphics device should be the
Primary Display. Configuration options: [Auto] [CPU Graphics] [PCIE] [PEG]
3-8
Default] [Auto]
DN-300-R2