Asus DN-300-R2 Manual page 33

Hyper-threading [Enabled]
The Intel Hyper-Threading Technology allows a hyper-threading processor to
appear as two logical processors to the operating system, allowing the operating
system to schedule two threads or processes simultaneously.
[Enabled] Two threads per activated core are enabled.
[Disabled] Only one thread per activated core is enabled.
Thermal Monitor [Enabled]
This item allows you to enable or disable the Thermal Monitor.
Configuration options: [Disabled] [Enabled]
CPU Power Management Control
This item allows you to manage and configure the CPU's power.
Intel(R) SpeedStep(tm) [Auto]
This item allows your system to support more than two frequency ranges.
Configuration options: [Auto] [Disabled] [Enabled]
Intel(R) Speed Shift Technology [Auto]
This item allows you to enable or disable Intel(R) Speed Shift Technology
support. When enabled, CPPC v2 interface allows hardware controlled
P-states. Configuration options: [Auto] [Disabled] [Enabled]
Turbo Mode [Enabled]
This item allows you to automatically set the CPU cores to run faster than the base
operating frequency when it is below the operating power, current and temperature
specification limit. Configuration options: [Enabled] [Disabled]
Turbo Mode is only available on selected CPU models only.
CPU C-states [Auto]
This item allows you to set the power saving of the CPU states. Configuration
options: [Auto] [Disabled] [Enabled]
The following items appear only when you set the CPU C-States to [Enabled].
Enhanced C-states [Enabled]
[Enabled]
[Disabled] Disables enhanced C1 state.
CPU C3 Report [Enabled]
Allows you to disable or enable the CPU C3 report to OS. Configuration options:
[Enabled] [Disabled]
CPU C6 Report [Enabled]
Allows you to disable or enable the CPU C6 report to OS. Configuration options:
[Enabled] [Disabled]
CPU C7 Report [CPU C7s]
Allows you to disable or enable the CPU C7 report to OS. Configuration options:
[Disabled] [CPU C7] [CPU C7s]
Chapter 3: BIOS setup
Enables enhanced C1 state.
3-7