Pch-Fw Configuration; Onboard Devices Configuration - Asus STRIX Z270H GAMING Manual

SATA6G_1(Charcoal Black) - SATA6G_6(Charcoal Black)
SATA6G_1(Charcoal Black) - SATA6G_6(Charcoal Black)
This item allows you to enable or disable the selected SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug
These items appears only when the SATA Mode Selection is set to [AHCI] and allows
you to enable or disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.6.6

PCH-FW Configuration

This item allows you to configure the firmware TPM.
3.6.7

Onboard Devices Configuration

The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Definition Audio Controller.
Configuration options: [Disabled] [Enabled]
M.2_1 Configuration: [Auto][SATA mode][PCIE mode]
[Auto]
[SATA mode]
[PCIE mode]
USB Type C Power Switch
[Auto]
[Enabled]
RGB LED lighting
This item allows you to turn the RGB LED lighting on or off.
Configuration options: [Off] [On]
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers.
Configuration options: [Disabled] [Enabled]
3-18
Auto-detects the M.2 device mode. If a SATA device is detected,
SATA6G_1 will be disabled.
Only supports M.2 SATA devices. Please note that SATA6G_1 port cannot
be used in this mode.
Only supports M.2 PCIE devices.
The system will automatically detect your USB Type C devices and provide
suitable power if needed.
The USB Type C port will always provide power to your devices.
Chapter 3: BIOS Setup