Tool Menu - Asus DN-300-R2 Manual

The dbx file must be formatted as a UEFI variable structure with time-based
authenticated variable.
Delete key
Allows you to delete the Key from your system. Configuration options: [Yes]
[No]
Boot Option Priorities
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
To select the boot device during system startup, press <F8> when ASUS Logo
appears.
UEFI Network Device Priorities
This item allows you to set the booting order of the UEFI Network devices.
Boot Override
These items displays the available devices. The number of device items that
appears on the screen depends on the number of devices installed in the system.
Click an item to start booting from the selected device.
3.6

Tool menu

The Tool menu items allow you to configure options for special functions. Select an
item then press <Enter> to display the submenu.
ASUS EZ Flash 3 Utility
This item allows you to run ASUS EZ Flash 3 utility. When you press <Enter>, a
confirmation message appears. Use the left/right arrow key to select between [Yes]
or [No], then press <Enter> to confirm your choice.
Start Quick Memory Diagnosis
This item allows you to run quick memory diagnosis. When you press <Enter>, a
confirmation message appears. Use the left/right arrow key to select between [Yes]
or [No], then press <Enter> to confirm your choice.
Start Quick HDD Diagnosis
This item allows you to run quick HDD diagnosis. When you press <Enter>, a
confirmation message appears. Use the left/right arrow key to select between [Yes]
or [No], then press <Enter> to confirm your choice.
Start CPU Stress Diagnosis
This item allows you to run CPU stress diagnosis. When you press <Enter>, a
confirmation message appears. Use the left/right arrow key to select between [Yes]
or [No], then press <Enter> to confirm your choice.
Chapter 3: BIOS setup
3-19