Table of Contents
Advertisement
1.2.8
Internal connectors
1.
Intel
Z97 Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6 [red])
®
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
chipset.
•
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section SATA Configuration for details.
•
Before creating a RAID set, refer to section RAID configurations or the manual
bundled in the motherboard support DVD.
•
When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section
SATA Configuration for details.
ASUS MAXIMUS VII HERO
Rapid Storage Technology through the onboard Intel
®
Z97
®
1-39
Advertisement
Table of Contents
