Setting The Position Of The Stops - DURKOPP ADLER 755 A Service Instructions Manual

Stacker

28.2.7 Setting the position of the stops

The position of the stops is factory-set to the correct value and should only
be changed in exceptional cases.
Fig. 248: Setting the position of the stops
Setting dimensions
Dimension 1
Dimension 2
Dimension 3
Dimension 4
Service Instructions 755 A/756 A - 00.0 - 02/2019
Dimension 1 Dimension 2
70 mm
50 mm
25 mm
maximum
Dimension 3
Dimension 4
253