DURKOPP ADLER 755 A Service Instructions Manual page 49

Needle bar
14. Loosen the screw (13).
15. Loosen the screws (12).
16. Use a suitable tool to push the bolt (14) completely out of the lever (15).
 The thread lever is loose.
Fig. 40: Disassembling the needle bar linkage (4)
(16) - Screws
(17) - Oil wick
17. Turn the handwheel until the next screws on the arm shaft crank are
18. Loosen the screws (16).
19. Tie the oil wick (17) off the felt (18).
20. Pull the needle bar linkage (11) including thread lever and oil wick (17)
Service Instructions 755 A/756 A - 00.0 - 02/2019
⑯
accessible.
out of the machine head.
(18) - Felt
⑰ ⑱
47