Replacing the pneumatic cylinders
Fig. 253: Replacing the pneumatic cylinders
(1) - Pneumatic cylinder 1
(2) - Pneumatic cylinder 2
To replace the pneumatic cylinders:
1. Remove the covers ( p. 257).
2. Uncouple the pneumatic lines.
Fig. 254: Replacing pneumatic cylinder 1
(1) - Nut
To replace pneumatic cylinder 1:
1. Loosen nuts (1) and (2).
2. Disassemble the old pneumatic cylinder.
3. Assemble the new pneumatic cylinder.
4. Connect the pneumatic lines.
5. Place and tighten the side panel.
6. Switch on the compressed air supply.
7. Set the pneumatic cylinder to a dimension of 175 mm.
258
②
Replacing pneumatic cylinder 1
175 mm
① ②
①
③
(3) - Pneumatic cylinder 3
(2) - Nut
Service Instructions 755 A/756 A - 00.0 - 02/2019
Stacker