ESIE06-03
1.3
Fault-diagnosis by Remote Controller
Explanation
If operation stops due to malfunction, the remote controller's operation LED blinks, and malfunction
code is displayed. (Even if stop operation is carried out, malfunction contents are displayed when
inspection mode is entered.) The malfunction code enables you to tell what kind of malfunction caused
operation to stop. See page 3-6 for malfunction code and malfunction contents.
Part 3 – Troubleshooting
Malfunction code
Inspection/Test button
Inspection display
Troubleshooting
1
3 3
4
5
3–5