Removal procedure: outdoor unit ERYQ005~007AAV3
2.2
Removal of the Panels and Plates
1
Warning
Procedure
Step
1 Remove the panels and
plates.
1
Loosen the 4 screws
and lift the top panel.
3
5 5
2
Loosen the 4 screws
and remove the
discharge grille.
5–6
Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
Discharge
grille
Top panel
Outdoor air thermistor
Heat
exchanger
Points
Take care not to cut your finger by
the fins of the heat exchanger.
Part 5 – Disassembly and Maintenance
ESIE06-03