Daikin Altherma EKHBH Series Service Manual page 174

Removal procedure: outdoor unit ERYQ005~007AAV3
1
Step Procedure
4 Remove the sound
blanket (top-lower).
3
5 Remove the sound
blanket (inner).
5 5
6 Release the discharge
pipe thermistor.
7 Cut the clamp by
nippers. Disconnect the
outdoor heat exchanger
thermistor.
5–22
sound blanket
(top-lower)
sound blanket (inner)
Discharge pipe
thermistor
Clamp
Points
Since the piping ports on the sound
blanket (inner) are torn easily,
remove the blanket carefully.
Pay attention to the direction of the
clip so as not to touch the lead wire
of the thermistor when
reassembling.
Clip
Clamps should be always
available. Fix it as it was before.
Outdoor heat
exchanger
thermistor
Part 5 – Disassembly and Maintenance
ESIE06-03