Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual page 93

Description
The table has the following columns:
● Radio
Shows the WLAN interface visible to the access point.
● SSID
Shows the SSID of the access point.
● BSSID
Shows the MAC address of the access point.
● System Name
all access points support this parameter.
● Channel
Shows the channel on which the access point transmits or communicates.
● Signal Strength [dBm]
Shows the signal strength of the access point in dBm.
● Signal Strength [%]
Shows the signal strength of the access point as a percentage.
● Type
Shows the mode of the WLAN interface.
● Security
Shows which authentication method is used.
If the authentication method "Open System + Encryption" or "Shared Key" is used,
"Encrypted (WEP/AES)" is displayed for both authentication methods.
● WLAN Mode
Shows the transmission standard. If DFS is activated, the transmission standard
"802.11h" is not shown additionally but only the configured transmission standard
"802.11a" or "802.11n".
● State
Shows the status of the access point, for example whether or not the access point is
available.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
displays the system name of access point. The entry depends on the access point. Not
Configuring with Web Based Management
5.4 "Information" menu
93