Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual page 186

Configuring with Web Based Management
5.6 "Interfaces" menu
The WBM page shows the available data transmission speeds for the WLAN mode
802.11a/b/g. If necessary, you can change the data transmission speeds. Otherwise, we
recommend that you retain the default setting for data transmission speeds. The access
point will then use only the selected data transmission speeds for communication with the
clients.
Description
Table 1 has the following columns:
● Radio
Specifies the WLAN interface to which the information relates.
● Use selected data rates only
If you enable this option, you can specify the data transmission speeds for the required
WLAN interface.
If this option is disabled, the default values are used. As default, this option is disabled.
"Radio" drop-down list
In this drop-down list, select the WLAN interfaces displayed in Table 3 (Data Rate).
186
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03