Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual page 248

Industrial wireless lan to ieee 802.11n web based management
Table of Contents

Advertisement

Appendix D
D.1 Messages in the event log
Messages
WDS Y at WLAN X is down.
Overlap-AP found on WLAN X: AP <system name> <MAC>
found on channel <channel number.> <RSSI value>
Overlap-AP aged out on WLAN X: AP <system name>
<MAC> on channel <channel number.> <RSSI value>
DFS: Radar interference detected on WLAN X at channel
<channel number> (frequency <frequency> MHz). Changing
to channel <channel number> (frequency <frequency> MHz)
DFS: channel <channel number> (frequency <frequency>
MHz) aged out from NOL at WLAN X and can be used
again.
DFS: Radar interference detected on WLAN X at channel
<channel number> (frequency <frequency> MHz). No more
free channels to use!!
Status of the WLAN interface (in client mode only)
Messages
Link up on WLAN X.
Link down on WLAN X.
Messages on configuration
Messages
WBM: Authentication failure.
Telnet: Authentication failure.
Restart requested
Messages about file upload or download
Messages
File upload via HTTP(S): load of FileType <file type> OK
-> restart required
File upload via HTTP(S): load of FileType<file type> OK
File upload via HTTP(S): validation of FileType <file type>
IDENTICAL
File upload via HTTP(S): validation of FileType <file type>
FAILED
248
Description
When logging in with Web Based Management (WBM), the wrong password was en-
tered. The event can be enabled or disabled in "System -> Events" (authentication fail-
ure).
When logging in via Telnet, the wrong password was entered. The event can be enabled
or disabled in "System -> Events" (authentication failure).
Restart due to a user request. The event can be enabled or disabled in "System ->
Events" (cold/warm start).
Description
No link exists on the WDS interface Y of WLAN interface X.
A further access point was found on the channel set for the
WLAN interface X or on a neighboring channel.
The overlapping access point could no longer be detected
during the configured aging time and was removed from the
"Overlap AP" list.
A primary user (e.g. radar or weather station) was found on
the channel set for WLAN interface X or on a neighboring
channel. The channel will be blocked for 30 min. The access
point changes to the configured alternative channel or to the
next free channel on which there is no primary user.
No primary user found any longer on the channel. The
channel was removed from the list of blocked channels and
can be used again
A primary user was found on all available channels. There is
no free channel available, the WLAN interface X will be
deactivated until one of the channels becomes available.
Description
The WLAN interface X is enabled.
The WLAN interface X is disabled.
Description
Loading the file via HTTP(S) was successful. A restart is
required.
Loading the file via HTTP(S) was successful.
Loading the file via HTTP(S) was successful. The file is
identical to the existing file.
Loading the file via HTTP(S) failed. The file contains errors
or is invalid.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents