Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual page 172

Industrial wireless lan to ieee 802.11n web based management
Table of Contents

Advertisement

Configuring with Web Based Management
5.6 "Interfaces" menu
● Frequency Band
Specify the frequency band. In client mode, dual-frequency operation is also possible.
Note
Configuring WLAN interfaces of the W786-2IA RJ-45 for different frequency bands
If both WLAN interfaces are configured for the same frequency band on this device, there
may be mutual influence or interference. This applies in particular when there is a high
data throughput.
● WLAN Mode
Select the required transmission standard for the configured frequency band.
– WLAN Mode 2.4 GHz
– WLAN Mode 5 GHz
● DFS (802.11h)
Enables or disables the "Dynamic Frequency Selection (DFS)" function.
– Enabled
– Disabled
172
Specify the transmission standard for the 2.4 GHz frequency band. The selection
depends on the country setting.
Specify the transmission standard for the 5 GHz frequency band. The selection
depends on the country setting.
If the access point discovers a disruption on the current channel, for example due to a
primary user, it automatically switches to an alternative channel. DFS is also the
requirement for the use of certain wireless channels.
The DFS function is not used.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents