Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual page 196

Configuring with Web Based Management
5.6 "Interfaces" menu
CSV file
The CSV file contains information on the configuration of the device and detailed information
on all individual measurements and is divided into two areas: The first area contains the
configured settings:
● The system name of the client
● The IP address of the device
● The MAC address of the device
● The total number of measured values
● The interval between acquisition of two measured values
● The maximum data rate
● The setting of the external antennas
● The maximum possible transmit power
The second area is a table. The table contains the following for each measured value:
● The consecutive number of the measurement
● The time stamp
● The BSSID
● The received signal strength in % and in dBm
● The raw value of the RSSI (Received Signal Strength Indication)
● The roaming indicator. The indicator changes between 0 and 1 with each roam
● The channel on which the client is connected to the access point
● The average data rate (if there is no data exchange between the access point and client,
the data rate is "0")
● The name of the access point
● The current channel (this can also be the channel that the client is currently scanning)
196
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03