Installing The Replacement Fan Tray - HP Aruba 6400 Series Installation And Getting Started Manual

Procedure
1. Select the fan tray to remove.
2. Loosen the two retaining screws securing the fan tray to the chassis.
3. Depress and hold the fan tray latch, grasp the handle below the latch, and pull the handle to pivot the fan
tray out of the slot.
1
2
4. Shift the fan tray to the right to disengage it from the chassis.

Installing the replacement fan tray

Prerequisites
• Have the replacement fan tray available and ready to install.
• Remove the fan tray you are replacing. See Removing the fan tray
1. Line the fan tray up with the empty slot.
Chapter 9 Adding or replacing switch components 89