HP Aruba 6400 Series Installation And Getting Started Manual page 58

Installing the optional R0X37A Aruba 6400 4-post Rack Mount Kit
1 Adjustable slide rail (left side)
2 Adjustable slide rail (right side)
3 Rear post rack brackets
4 Left side chassis rail spacer
5 Right side chassis rail spacer
6 Rear adapter plates
7 Cage nuts
8 Flathead and 10-32 screws
Prerequisites
• Ensure that the four-post rack or cabinet you plan to use is rated to support the weight of all devices you
plan to install in the rack or cabinet. For information on Hewlett-Packard Enterprise racks, visit https://
www.hpe.com/us/en/product-catalog/servers/server-racks.hits-12.html.
• Plan for the chassis space requirements before installing the rack mount kit. For switch dimensions, see
Product dimensions.
• A four-post equipment rack or cabinet meeting the following specifications:
19-inch rack
◦
Depending on which Aruba 6400 switch you are mounting, space available for a 7-Rack Unit (7U)
◦
Aruba 6405 Switch or a 13-Rack Unit (13U) Aruba 6410 Switch.
A front and rear air flow clearance of at least 30 cm (11.8 inches). (Air flow direction is front-to-rear.)
◦
58
1
2
7
8
Attaches to left side rack front and rear posts
Attaches to right side rack front and rear posts
Attach to rear adapter plates and to rear rack posts
Attaches to bottom left side of chassis and front left rack post
Attaches to bottom right side of chassis and front right rack post
• Attach to left-side and right-side of chassis in rear mounting
position 3
• Attach to rear post rack brackets
Aruba 6400 Switch Series Installation and Getting Started
3
6
4
5
Guide