HP Aruba 6400 Series Installation And Getting Started Manual page 64

6. On each side of the rack, attach a rear bracket.
7. Using four people, slide the chassis onto the rack rails until the rack ears contact the front rack posts.
Use the screws provided to secure the rack ears to the front posts.
8. Secure the rear adapter plates you installed earlier to the rear post rack brackets with the included
10-32 screws.
64
WARNING: Before attempting to configure or use the switch, be sure to secure it to the
rack using the screws and rack mounting hardware provided. Failure to secure the chassis
and supporting hardware could result in unexpected shifting or movement of the switch
and risk of personal injury or product damage.
NOTE: Do not tighten the screws holding the rear bracket to the rear adapter plate until the
switch chassis is installed and all parts are attached.
Aruba 6400 Switch Series Installation and Getting Started
Guide