HP Aruba 6400 Series Installation And Getting Started Manual page 52

5. Attach the rack ears to the chassis in one of the three positions shown. For a flush mount with the front
of the switch, mount the rack ears with the flange toward the front of the switch. If you are mounting an
Aruba 6410 switch, use two rack ears mounted one above the other, on each side.
Figure 19: Two-post rack mount options
1 Mounting position "1".
2 Mounting position "2".
3 Mounting position "3".
52
NOTE: If you plan to install the (included) cable manager on the switch, you must install the
rack ears in the front rack mount position, flanges flush with the front of the switch.
1
NOTE: If you plan to install the cable manager on the switch, you must use
Mounting position "1" to mount the switch in the rack.
3
2
Aruba 6400 Switch Series Installation and Getting Started
Guide