HP Aruba 6400 Series Installation And Getting Started Manual page 54

Figure 22: Two-post rack mount using the middle (number 2) mounting position
Manually mounting the chassis in a two-post rack
WARNING: This procedure is for two or more persons manually mounting an Aruba 6405 five-
slot chassis weighing less than 45 kg (100 lbs), or four persons manually mounting an Aruba
6410 ten-slot chassis weighing less than 90 kg (200 lbs) in a two-post rack. For weights
exceeding these limits, reduce the weight of the chassis or use a mechanical lift. See Using a
mechanical lift to mount the chassis in a two-post rack for more information on using a
mechanical lift. See also Aruba 6400 product weights.
Prerequisites
• The front rack ears included with the switch are installed on the chassis.
• The screwdriver and rack mounting screws are available in easy reach.
54
2
1
Aruba 6400 Switch Series Installation and Getting Started
3
Guide