Restoring The Pcu Hard Disk From The Pg/Pc Hard Disk - Siemens SINUMERIK 810D Commissioning Manual

4. Disconnecting connected network drives: You can terminate all connections to the
4.1.2

Restoring the PCU hard disk from the PG/PC hard disk

Figure 4-2
Requirements
● Ghost version ≥ 7.x is installed on the PCU and on the PG/PC.
● The directory in which the restore image is stored exists on the PG/PC.
● Windows (any version) is installed on the PG/PC.
● The PCU and PG/PC are connected with an Ethernet cable.
Operator actions
1. Switch on the PG/PC and insert the CD into the drive.
2. Select the "Service menu" [hidden menu entry] in the Boot Manager.
3. Press key <7>: Backup/Restore
4. Enter one of the passwords for authorization levels 0 - 2.
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
PG/PC.
Restoring hard-disk content
While the PCU is ramping up (after switching the controller off and then on again)
The main menu is displayed:
The system prompts you to enter a password:
The following menu is displayed:
PLEASE SELECT:
1 Harddisk Backup/Restore with GHOST
4 Partitions Backup/Restore with GHOST
(locally)
5 ADDM Backup/Restore
9 Back to Main Menu
4.1 Backing up/restoring data with an Ethernet connection
Backing up and Restoring Data
4-5