Addition, Removal, And Replacement Of The Internal Usb Cable; Addition - NEC Express5800 Series Maintenance Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Configuring and Upgrading the System
5.8
Addition, Removal, and Replacement of the Internal USB Cable
5.8.1
Addition
Follow the procedure described below to add the internal USB cable.
1.
Shut down OS.
The power of this system turns OFF automatically.
2.
Remove the power cord from the outlet.
3.
Remove the CPU/IO module by referring to "5.4.1 Removing CPU/IO Module" in this chapter.
4.
Install the cable clamp.
Important
5.
Hold the knob inside the device, and remove the
cover of the USB port.
Important
6.
Install the internal USB cable to the connector on
the CPU/IO board.
Important
150
Important
See Chapter 2 ("5.1.3 Installing, Removing and Replacing Devices) and Chapter 1
(1.8 Anti-Static Measures) in Safety Precautions and Regulatory Notices) before
starting installing or removing options.
Align the cable clamp with the mark to
install it.
Keep the removed cover at hand.
Align with the notch of the connector.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices
Advertisement
Table of Contents
