Chapter 2 Configuring and Upgrading the System
5.6
Processor (CPU)
In addition to the standard CPU (Intel® Xeon® Processor), you can operate the system by adding one CPU to
each CPU/IO module.
Make sure to use the CPU specified by NEC. Installing a third-party CPU may
Important
cause a failure of the CPU as well as the server. Repairing the server due to
failures or damage resulting from these products will be charged even if it is
under guarantee.
Before adding or removing a CPU, power off the server and then remove the
CPU/IO module.
See Chapter 2 ("5.1.3 Installing, Removing and Replacing Devices") and Chapter
1 (1.8 Anti-Static Measures )in Safety Precautions and Regulatory Notices before
starting installing or removing options.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices
CPU1
(Standard CPU)
CPU2
(Additional CPU)
133