Chapter 3 Useful Features
3.3
Physical Formatting of the Hard Disk Drive
The following describes how to execute physical formatting of hard disk drive.
1. Press the <Enter> key on the Adapter List menu.
Adapter Properties menu appears after a short while.
2. Select SAS Topology and press the <Enter> key.
202
Important
This utility is set for the CPU/IO module of the primary side. When you configure the
CPU/IO module of the secondary side, first turn off the DC power to the server, plug
out and plug in the AC power cord of the primary side. Then start the server.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
3. SAS Configuration Utility