NEC Express5800 Series Maintenance Manual page 170

Chapter 3 Useful Features
②. MAC [XX:XX:XX:XX:XX:XX] submenu
Option
iSCSI Attempt Name
iSCSI Mode
Internet Protocol
Connection Retry Count
Connection Establishing
Timeout
OUI-format ISID
Configure ISID
Enable DHCP
Initiator IP Address
Initiator Subnet Mask
170
Parameter
Up to 96 alphanumeric
characters
[Disabled]
Enabled
Enabled for MPIO
[IP4]
IP6
0-[5]-16
100-[16000]-20000
(Display only)
6 digits
[Disabled]
Enabled
IP Address
IP Address
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
Descriptions
Set the iSCSI attempt name.
Set the iSCSI mode.
Set the iSCSI IP mode.
Set the number of retries of iSCSI connection.
Set the timeout value of iSCSI connection In
milliseconds.
OUI-format ISID is displayed.
Set the lower three bytes of OUI-format ISID. For the
default, store the MAC address value.
Enable or disable the DHCP.
Set the initiator IP address. This option does not appear
if Enable DHCP was enabled or Internet Protocol was set
to [IP6].
Set the initiator subnet mask. This option does not
appear if Enable DHCP was enabled.
1. System BIOS