Mitsubishi MELSEC-A Series Operating Manual page 31

2. LET,'S TRY USING THE A8PUE
MELSEC-A
2.5
Let's Try Uslng Help
The [HELP] key is pressed when using the help functions.
The help function items of each mode are displayed in a menu format by
pressing the [HELP] key. Therefore, corresponding items can be selected and
executed.
This section explains, as sample operations, the reading operation by using
instruction designation and the changing operation of the display format of a
current value.
2.5.1
Readlng an instruction In a sequence
program
This section explains how to read the place where the "MOV" instruction is
used in the sequence program.
[Sample operation]
@ HELP
I
1:COp[BNT DIEPLAY
CLMR:BND
Press the [HELP] key in the READ
mode.
1:I€fSTRDCTIOB
1
:
BTEP
KEY IW IIRTRDCTION
KEY IN IBSTRUCTIOB
[YOV
I
Select " 1 : READ'
Select "2: INSTRUCTION'
Set the "MOV" instruction.
*
A
13bYOV
R
6
D 1 0
'MOV D20 K2Y18' of the 13th step
13 010
13
K1YOl8
isread.
13)YOV
13
D2O
Message when there is not a 'NOW
instruction in the steps after 13th
Reading an instruction by using the help function in-
struction designation has now been completed.
Now, let's try changing a current value display format.