Mitsubishi MELSEC-A Series Operating Manual page 157

6.
I
r:
HOW
,..
,TO
',,
USE EACH FUNCTION
,
mELSEca
[Explanation]
(1) When wrlting to the memory is done
Begin operations after putting the ACPU
in
the STOP state.
(2) When writing to
the
memory is not done
Operations can be executed whether the ACPU is in the STOP or RUN
state.
(3) The address is the memory address (absolute address) that reads the
memory contents of an ACPU.
Input five hexadecimal digits max.
(Press the
[O]
to [9] and
[A] to [F]
keys on the lower part of the keyboard.)
(4) Input the machine language (two hexadecimal digits max.) to be written
to the memory of the currently displayed memory address.
(Use the [0] to [9] and [A] to [F] keys on the lower part of the keyboard.)
When not writing to memory, this operation is unnecessary.
*
When the key is pressed, press the correct key continuously.
(5) When writing machine language, execute writing in accordance with the
use of the memory to ensure that the ACPU can operate normally.
When unnecessary writing is executed, the ACPU sometimes malfunc-
tions.
(6) Pressing the [END] or [CLEAR] keys returns to the "4:OTHERS" menu.
6-90