6. HOW.TO
1.
!
USE EACH FUNCTION
[Explancltlon]
(1)
When a device that is nbt displayed
-is
set or reset, the corresponding
device and device state are displayed.
(2) The current value of a device changes according to the contents of the
sequence program being processed when the ACPU is in the RUN state.
(3) Special registers are managed by the OS of ACPU.
When changing the current value
of a special register, Bperate after
confirming the contents by utilizing the User's Manual of the connected
ACPU.
(4)
Pressing the [SHIFT] and [TEST] keys in the
MONITOR mode (list
monitoring) enables the test operation
of the designated device indicated
by the cursor
(
).
When the [SHIFT] and [TEST] keys are pressed in the READ, WRITE,
INSERT, DELETE,
or MONITOR (fist monitoring) mode, the test opera-
tion is enabled by inputting the designated device and device number.
6 - 5 4