Setting Delay Self-Clean; Canceling Self-Clean Cycle - Amana ARC700 Service

Operating Functions
Setting Delayed Self-Clean
1. Remove the oven racks and all cooking utensils from
the oven. Clean excess spills from the oven interior.
2. Touch CLEAN and three soild dashes will be
displayed.
3. Touch apropriate slew pad until the desired cleaning
time is displayed.
4. Touch STOP TIME.
5. Touch apropriate slew pad until the desired stopping
time is displayed. A starting time will automatically be
calculated based on the amount of cleaning time and
the stop time.
DELAY, CLEAN, and LOCK will light in the display. As
the oven door locks and unlocks, LOCK will flash in the
display. When the door is locked, LOCK will remain in
display area. The oven will begin to clean at the preset
time and ON will light in the display. When the cycle is
completed the oven will automatically turn off.
Part
Bake and Broil Elements
Broiler Pan and Grid
Control Knobs
Inside Oven Door
Oven Interior Surfaces
Oven Racks and Storage
Drawer
Outside Finsh and Backguard
RS2320001 Rev. 2
Materials to Use
Do not clean the bake or broil element . Any soil will burn off when the
element is heated. The bake element is hinged and can be lifted to
clean the oven bottom.
Soap and a Nonabrasive Drain fat, cool pan and grid slightly. (Do not let soiled pan and grid stand
Plastic Scouring Pad in oven to cool.) Sprinkle with soap. Fill the pan with warm water. Let
pan and grid stand for a few minutes. Wash: scour if necessary. Rinse
and dry. Option: The broiler pan and grid may also be cleaned in the
dish washer.
Mild Soap and Water Pull off knobs. Wash gently but do not soak. Dry and return knobs,
making sure to match flat area on the knob to the flat area on the shaft.
Soap and Water Clean the outside of the door and the window area with warm soapy
water. Do not clean the oven door gasket. The gasket should not be
moved while cleaning. Avoid getting and cleaning materials on the
gasket.
Soap and Water Cool before cleaning. Frequent wiping with mild soap and water will
prolong the time between major cleanings. Be sure to rinse throughly.
Soap and Water For heavy soil, clean by hand and rinse throughly. Remove the drawer
and racks for ease in cleaning. Be sure the darwer is dry before
replacing it.
Soap and Water Wash all glass with cloth dampened in soapy water. Rinse and polish
with a dry cloth. If knobs are removed, do not allow water to run down
inside the surface of glass while cleaning. Touch OVEN CANCEL after
cleaning the control panel. A function may be set accidentlly whlie wiping
control panel glass.
To avoid the risk of personal injury do not touch
the oven vents or areas around the vents during
self-cleaning. These areas can become hot
enough to cause burns.
To avoid the risk of damage to the automatic
locking system, do not try to force the oven door
open when LOCK is flashing in the display.
When Finished
When the oven has cooled to a safe temperature, LOCK
will disappear from the display and the oven door can be
opened.

Canceling Self-Clean Cycle

1. Touch OVEN CANCEL.
2. When the oven has cooled to a safe temperature,
LOCK will clear from the display and the door can be
opened.
General Directions
20