Table of Contents
Advertisement
Programming Instructions
Electronic Oven Control Options
PANEL LIGHT - Used to turn on light in range control
panel.
OVEN LIGHT - Used to turn on light inside oven.
CLOCK - Used to set time of day or change display to
Time of Day.
MINUTE TIMER - Used to time any kitchen function or
cancel timer.
COOK TIME - Used to set timed bake or view remaining
cooking time.
STOP TIME - Used to set delay bake and self-clean.
BAKE - Used to select bake.
BROIL - Used to select broil.
CONV BAKE - Used to select convection bake.
CONV - Used To select convection.
CONV BROIL - Used to select convection broil.
CLEAN - use to select self-clean cycle.
SLEW PADS -
or
time.
OVEN CANCEL - Cancels any cooking or cleaning
function.
- Used to set temperature or
Special Oven Control Functions
Preheat Signal - After setting the oven to bake and
selecting a temperature, the oven will preheat. When the
oven reaches the set temperature, a 1 second signal will
sound.
End of Cycle Signal - When a timed cooking cycle is
completed, three long signals will sound. The end of
cycle signal will continue to sound until Oven Cancel is
touched.
Child Lockout - This is a safety feature that can be
used to prevent children from accidentally programming
the oven. It disables the electronic oven control.
Touch and hold Bake and Cook Time for 10 seconds.
OFF will display where the temperature normally
appears.
To reactivate the control, touch and hold Bake and Cook
Time for 10 seconds. Child lockout features must be
reset after a power failure.
12 Hour Automatic Cancel - This is a safety feature
that prevents the oven from continuing to operate if it has
been left on for over 12 hours. If a cooking function
continues longer than 12 hours without any options on
the oven control being touched, this feature turns the
oven off. Any time an option is touched, the 12 hour
automatic cancel is reset.
13
RS2320001 Rev. 2
Advertisement
Table of Contents
