Appendix; Certificates And Approvals; A.1 Certificates And Approvals - Siemens SIPLUS HCS Series Operating Instructions Manual

Appendix

A.1

Certificates and approvals

A.1.1 Certificates and approvals
Note
Approvals are only valid when marked on the product
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
EC directives
SIPLUS HCS4300 products conform to the requirements and safety objectives of the EC
Directives listed below.
Low-voltage directive
SIPLUS HCS4300 products meet the requirements of the directive:
2014/35/EU "Electrical Safety". The product is designed in accordance with EN 50178.
EMC directive (electromagnetic compatibility)
SIPLUS HCS4300 products meet the requirements of the EC Directive:
2014/30/EU "Electromagnetic Compatibility"
The product is designed for operation in industrial areas with the following requirements:
● Interference emission according to EN 61000-6-4
● Noise immunity according to EN 61000-6-2
RoHS Guideline
SIPLUS HCS4300 products meet the requirements of the
RoHS Directive 2011/65/EU (RoHs II):
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005
A
199