Status And Actual Displays; Power Output Control; Half-Wave Control - Siemens SIPLUS HCS Series Operating Instructions Manual

Functions

9.2 Status and actual displays

9.2 Status and actual displays
The following options are available to obtain information on the current status of the device,
system or process:
Operating state display via LEDs
The LEDs on the control interface module (CIM) as well as on the power output module
(POM) provide information about the current operating state of the device or the heating
system.
For detailed information on the meaning of the LED displays, see Section
"Central Interface Module (CIM) (Page 145)" and Section
"LED operating display for POM (Page 146)".
9.3

Power output control

9.3.1

Half-wave control

Half-wave control can be parameterized for activating the heating elements. This
parameterization is performed for each POM and applies to all channels of the POM.
106
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005