Table of Contents
Advertisement
Data record 202 "Measured values for PM4000 U/I"
The data record describes an HCS function and addresses the HCS.
Byte
0, 1
2, 3
4, 5
6, 7
8, 9
10, 11
12, 13
14, 15
16, 17
18, 19
20, 21
22, 23
24, 25
26, 27
28, 29
30, 31
The definition is by means of a structure with elements of type "INT".
The data record is answered with errors if no PM U/I is present.
Data record 203 "Measured values", HCS4300 with POM4320 Highend
The data record describes a function of the POM4320 Highend and addresses a POM.
Byte
0, 1
...
10, 11
12, 13
...
22, 23
24, 25
26, 27
28, 29
30, 31
32, 33
34, 35
Only with "2-pin connection between phase and phase", even without activated fault current moni-
1
toring. The value is "0" for all other connection types. The entire data record is always returned.
The data record is answered with errors if no POM4320 Highend is addressed.
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005
Meaning
Frequency with one decimal place
Voltage measured value L1/L12 in [V] with one decimal place
Measured voltage value L2/L23 in [V] with one decimal place
Measured voltage value L3/L31 in [V] with one decimal place
Current measured value RMS L1/L12 in [A] with three decimal places
Current measured value RMS L2/L23 in [A] with three decimal places
Current measured value RMS L3/L31 in [A] with three decimal places
Current measured mean value RMS L1/L12 in [A] with three decimal places
Current measured mean value RMS L2/L23 in [A] with three decimal places
Current measured mean value RMS L3/L31 in [A] with three decimal places
Power L1/L12 in [W] with one decimal place
Power L2/L23 in [W] with one decimal place
Power L3/L31 in [W] with one decimal place
Power mean value L1/L12 in [W] with one decimal place
Power mean value L2/L23 in [W] with one decimal place
Power mean value L3/L31 in [W] with one decimal place
Meaning
Current channel 1 in [A] with two decimal places
...
Current channel 6 in [A] with two decimal places
Power channel 1 in [W]
...
Power channel 6 in [W]
Fault current channel 1/3 in mA
0
0
Fault current channel 4/5 in mA
0
Fault current channel 6/2 in mA
1
1
1
Communications
10.2 Acyclic data exchange
139
Advertisement
Table of Contents
