Removal Of Tail Chassis - Husqvarna TR 650 TERRA 2013 Workshop Manual

4
5
Workshop Manual Ed. 09-2012
GENERAL PROCEDURES
TR 650 TERRA 2013 - TR 650 STRADA 2013

Removal of tail chassis

Remove the lower tail cover and the number plate holder as described in the
2
relevant paragraphs.
- Unfasten the two clips (1) of the shock absorber protection (2).
1
H11830
- Unscrew the screw (3) fastening the rear brake fluid tank (4).
3
H11831
- Move the cable harness with the electrical components in the inner part of
the chassis and place them on the rear wheel.
- Unscrew the four screws (5) and slide the chassis out from the rear (6).
H11832
5
H11833
When reassembling, make sure that you put the cable harness back
in the same position it was before.
E.16
6
H11834