Nixdorf Beep/Led Options; Ignore Unknown Characters - Symbol DS6707 Product Reference Manual

8 - 18 DS6707 Digital Imager Scanner Product Reference Guide

Nixdorf Beep/LED Options

When Nixdorf Mode B is selected, this indicates when the digital imager scanner should beep and turn on its
LED after a decode.
*
Normal Operation
(Beep/LED immediately after decode)
Beep/LED After CTS Pulse

Ignore Unknown Characters

Unknown characters are characters the host does not recognize. When Send Bar Codes with Unknown
Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound on
the digital imager scanner. When Do Not Send Bar Codes With Unknown Characters is selected, bar code
data is sent up to the first unknown character and then an error beep will sound on the digital imager scanner.
*
Send Bar Code
(with unknown characters)
Beep/LED After Transmission
Do Not Send Bar Codes
(with unknown characters)