Transmit Code 39 Check Digit; Code 39 Full Ascii Conversion - Symbol DS6707 Product Reference Manual

Transmit Code 39 Check Digit

Parameter # 2Bh
Scan a bar code below to transmit Code 39 data with or without the check digit.
Transmit Code 39 Check Digit (Enable)
(01h)
Code 39 Check Digit Verification must be enabled for this parameter to function.
NOTE

Code 39 Full ASCII Conversion

Parameter # 11h
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To
enable or disable Code 39 Full ASCII, scan the appropriate bar code below.
Enable Code 39 Full ASCII
(01h)
Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously.
NOTE
Code 39 Full ASCII to Full ASCII Correlation is host-dependent, and is therefore described in the
ASCII Character Set Table for the appropriate interface. See the
page 7-12 or the ASCII Character Set for RS-232 on page
*
Do Not Transmit Code 39 Check Digit (Disable)
(00h)
*
Disable Code 39 Full ASCII
(00h)
ASCII Character Set for USB on
8-19.
Symbologies 10 - 23