Image Brightness (Target White); Jpeg Image Options - Symbol DS6707 Product Reference Manual

5 - 12 DS6707 Digital Imager Scanner Product Reference Guide

Image Brightness (Target White)

Parameter # F0h 86h
Type: Byte
Range: 1 - 240
This parameter sets the Target White value used in Snapshot, Video and Video Viewfinder mode when auto
exposure is used. White and black are defined as 255 decimal and 0, respectively. If the value is programmed
to 180, which is the factory default, the white level of the image should be ~180.
To set the Image Brightness parameter, scan Image Brightness below followed by three numeric bar codes
representing the value. Leading zeros are required. For example, to set an Image Brightness value of 99, scan
0, 9, 9. See Appendix D, Numeric Bar Codes

JPEG Image Options

Parameter # F0h, 2Bh
JPEG images can be optimized for either size or for quality. Scan the JPEG Quality Selector bar code to enter
a quality value; the digital imager scanner then selects the corresponding image size. Scan the JPEG Size
Selector bar code to enter a size value; the digital imager scanner then selects the best image quality.
*
JPEG Quality Selector
*
180
(01h)
for numeric bar codes.
JPEG Size Selector
Image Brightness
(3 digits)
(00h)