Scanning In Hands-Free Mode - Symbol DS6707 Product Reference Manual

2 - 6 DS6707 Digital Imager Scanner Product Reference Guide

Scanning in Hands-Free Mode

The optional Intellistand adds greater flexibility to scanning operation. When the digital imager scanner is
seated in the stand's "cup," the digital imager scanner's built-in sensor places the digital imager scanner in
hands-free mode. When the digital imager scanner is removed from the stand it operates in its normal
hand-held mode.
Scanner
Holder (Cup)
Inserting the Digital Imager Scanner in the Intellistand
Figure 2-12
To operate the digital imager scanner in the IntelliStand:
Ensure the digital imager scanner is properly connected to the host (see the appropriate host chapter for
1.
information on host connections).
Insert the digital imager scanner in the Intellistand by placing the front of the digital imager scanner into the
2.
stand's "cup" (see
Use the Intellistand's adjustment knobs to adjust the height and angle of the digital imager scanner.
3.
Center the symbol in the aiming pattern. The entire symbol must be within the brackets.
4.
Upon successful decode, the digital imager scanner beeps and the LED turns green. For more information
5.
on beeper and LED definitions, see
Figure 2-12).
Table 2-1
Angle Adjustment Knob
Height Adjustment Knob
and Table 2-2.