Headset Services; Serial Port Services - Symbol MC909X User Manual

3 - 20 MC909X User Guide

Headset Services

NOTE Not available on MC9090-G with Windows CE 5.0.
To connect to a Bluetooth headset:
Ensure the mobile computer is discoverable and connectable. See Bluetooth Settings on page 3-21.
1.
Discover and bond (pair) with the headset.
2.
In , select the
3. BTExplorer
Select the
4. Trusted Devices
Tap the remote device folder.
5.
Tap and hold on the remote device and select
6.
Tap and hold on the headset service name and select
7.
The mobile computer connects to the headset. Refer to your headset user manual for instruction on
8.
communicating with a Bluetooth device.
To answer a phone call, press the Green Dot button on the mobile computer and press the Red Dot button
9.
to end a call.
NOTE If the mobile computer goes into suspend mode while in a call, the Bluetooth headset disconnects from
the mobile computer and audio is re-directed to the speakerphone.
To adjust the microphone gain:
Tap and hold on the headset service item and select
1.
Microphone Properties
Select the slider and adjust the gain.
2.
Tap .
3. OK

Serial Port Services

By default, COM ports COM4, COM5 and COM9 are Bluetooth virtual ports. If an application
NOTE
opens one of these ports, the Bluetooth driver activates and guides you through a Bluetooth
connection.
Use the wireless Bluetooth serial port connection just as you would a physical serial cable connection. You
must configure the application that will use the connection to the correct serial port.
To establish a serial port connection:
Ensure the mobile computer is discoverable and connectable. See Bluetooth Settings on page 3-21.
1.
Discover and bond (pair) with the remote device.See Bonding with Discovered Device(s) on page 3-9.
2.
In , select the
3. BTExplorer
folder.
Remote Devices
folder.
Explore
window appears.
folder.
Remote Devices
. A headset service item appears.
.
Connect
from the pop-up menu. The
Adjust Microphone