Symbol Spectrum24 AP-4131 Product Reference Manual page 239

The Kerberos Configuration parameters have been moved to the
Functions
6. From the
7. Set the KDC Server Name/IP to the IP Address where the KDC is setup.
8. (Optional) Set the Backup KDC Name/IP to the Name or the IP Address
9. Set the Realm Name to the Domain Name of the Win2k Server used as
10. Set the User ID and Password fields exactly the same as the Username
It is recommended that all APs have the same username and password so
the same configuration steps apply to all APs and only one account in Active
Directory is needed.
Network time can be obtained from a time server (SNTP or Daytime) other
than the same Win2k Server where the KDC resides. In the
screen, enter the IP address of the time server in the
AP-4131 Access Point Product Reference Guide
The access point can now be configured for Kerberos support via the
Serial or Telnet interfaces.
screen in the Serial and Telnet UI.
Configure Kerberos
of the backup or redundant KDC (if any).
the KDC.
and Password set in Active Directory for the AP user account.
Installing and Configuring Kerberos Setup Service
screen set Kerberos to Enabled.
Special
Network Time
Time Server field.
E-15