Symbol Spectrum24 AP-4131 Product Reference Manual page 109

2. Configure the EAP-TLS authentication settings as required:
AP-4131 Access Point Product Reference Guide
EAP-TLS/RADIUS
Quiet Period
Tx Period
Re-authentication When enabled, the access point forces the MU to
Re-auth Period
Re-auth Max
Supplicant
Timeout
Server Timeout
Max Req Retries
IAS Name/IP
Address
Backup IAS
Name/IP
IAS Password
When enabled, the access point assumes the role
of authenticator. The access point proxies the
MU's requests to authenticate with the EAP server.
Default is Disabled.
The time the access point waits before attempting
to acquire an MU. Default is 60 seconds.
Defines the length of time the access points waits
for an MU's response once the access point
requests an MUs identity. Default is 30 seconds.
re-authenticate after the re-authentication period.
Default is Enabled.
Defines the length of time a MU is waits before
initiating re-authentication attempts.
Default is 3600 seconds.
Defines the number of MU re-authentications
attempts permitted. Default is 2. If exceeded, the
access point fails MU re-authentication.
Time permitted for a response from the
authenticating MU. Default is 30 seconds.
Time permitted for a response from the EAP-TLS
authentication server. Default is 30 seconds.
Defines the maximum number of times an access
point re-transmits an EAP request. Default is 2.
Name or IP address of the authentication server.
Name or IP address of the backup authentication
server.
The shared secret password between the access
point and authentication server.
Configuring the AP
99