Symbol Spectrum24 AP-4131 Product Reference Manual page 170

Monitoring Statistics
2. Configure the AP system settings as required:
160
Unit Name
MAC Address (BSS)
IP Address
Net_ID (ESS)
Channel
Country
Antenna Selection
Shared Key
Kerberos
EAP/TLS
Key Width
Start Flashing All
LEDs
Reset AP
Identifies the AP name.
Identifies the unique 48-bit, hard-coded Media
Access Control address.
Identifies the network-assigned Internet Protocol
address.
Identifies the unique 32-character,
alphanumeric, case-sensitive network identifier.
Identifies the direct-sequence channel used by
the access point. The channel used is within the
range required for the operating country.
Identifies AP country code that in turn determines
the AP direct-sequence channel range.
Indicates if the AP is configured for
.
or
secret key used by the KSS and access point
(defined in the Configure Kerberos
Authentication window) is currently being used.
or
Kerberos encryption algorithm is being used with
the access point.
Enables Windows XP MUs to use EAP/TLS for
authentication using 40 or 128-bit WEP .
Displays the encryption algorithm key width
or
access point
Begins a test routine to check the LED
functionality and allows the user to determine
the AP location.
Clears the APs statistics and restores the last
saved configuration.
AP-4131 Access Point Product Reference Guide
indicates whether or not the
indicates whether or not the
currently being used by the
or