Symbol Spectrum24 AP-4131 Product Reference Manual page 190

Monitoring Statistics
Where:
Current # WLAP Itf
Current State
Priority
Root Interface
Root Priority
Root MAC Address
Root Path Cost
Itf ID
180
Refers to the current Wireless AP interfaces in use in
a range.
On initialization, the AP can be in any of the
following states of wireless operation:
• starting the initializing process:
– Initializing
– Sending Probe
– Send Assoc Req (association request)
– Send Cfg BPDU (configuration Bridge
Protocol Data Unit)
– Wait for Probe
– Send Probe Rsp (probe response)
– Send Assoc Rsp (association response)
– Send Cfg Rsp (configuration response)
– Received Root Rsp (Root response)
• operating in wireless mode:
– Root WLAP lost
– Disabled
– Functional
States the WLAP priority value assigned to the AP
under section 2.5: "Configuring Radio Parameters"
on page 71.
States the interface leading to the Root AP .
States the priority value of the Root AP .
States the MAC address of the Root AP .
Indicates the hops between the current WLAP and
the Root AP .
Identifies the wireless interface the AP uses to
communicate with another device.
AP-4131 Access Point Product Reference Guide