Symbol Spectrum24 AP-4131 Product Reference Manual page 152

Configuring the AP
7. Select
8. Press ENTER.
9. Enter the firmware filename in the firmware field
Change this only if the user or system/network administrator requires a new
filename. The default files for a 4131 model access point are dsap3_fw.bin
and dsapt3htm.bin.
Verify the path for the filename is accurate. (See step one)
10. Select
11. Press ENTER.
12. Select
13. The system prompts
If using telnet to connect to the AP through an Ethernet interface, do not use
the
the AP to reset and look for the firmware file over the serial interface.
14. Under the function heading
15. The system prompts
The Telnet session ends when the user answers " " at the prompt.
142
field and enter the TFTP Server IP address.
to save settings.
"
and press ENTER.
"
Type .
"
option. This option causes
Type .
"
AP-4131 Access Point Product Reference Guide
.
select