Kohler Command PRO EFI Series Service Manual page 57

Governor System
New Updated Design
N
I
M
C
J
K
N
I
P
O
New Sealed (Bonded)
GCU Module
M New Updated Design N
Wiring Harness
Assembly
4 Pin GCU to Main
O P Speed Control Input
Engine Harness
New Updated Design features a sealed (bonded) GCU
module wiring harness assembly that must NOT be
separated. This design is easily identifi ed by 3 screws
that secure DLA actuator bracket. This design also
has GCU wire tie-down bracket, plus a 4 pin connector
with speed input wire red w/yellow tracer. See pages
72-78 for an engine with new updated design electronic
governor.
62 690 05 Rev. E KohlerEngines.com 57