Download Print this page
Kohler Command PRO EFI ECV940 Owner's Manual

Kohler Command PRO EFI ECV940 Owner's Manual

Hide thumbs Also See for Command PRO EFI ECV940:

Advertisement

Quick Links

ECH940 & ECH980, ECV940 & ECV980
Owner's Manual
IMPORTANT:
Read all safety precautions and instructions carefully before operating
equipment. Refer to operating instruction of equipment that this engine powers.
Ensure engine is stopped and level before performing any maintenance or
service.
Warranty coverage as outlined in the warranty card and on KohlerEngines.
com. Please review carefully as it provides your specifi c rights and obligations.
To maintain compliance with applicable emission regulations, exhaust system
backpressure may not exceed limits which can be found on KohlerEngines.
com. Search by Model No., then select Specs tab.
Kohler Engines has published CO2 values on KohlerEngines.com website.
Record engine information to reference when ordering parts or obtaining warranty coverage.
62 590 18 Rev. D
Engine Model
Specifi cation
Serial Number
Purchase Date
KohlerEngines.com
EN
ESS
FRC

Advertisement

loading

Summary of Contents for Kohler Command PRO EFI ECV940

  • Page 1 KohlerEngines. com. Search by Model No., then select Specs tab. Kohler Engines has published CO2 values on KohlerEngines.com website. Record engine information to reference when ordering parts or obtaining warranty coverage.
  • Page 2 Safety Precautions WARNING: A hazard that could result in death, serious injury, or substantial property damage. CAUTION: A hazard that could result in minor personal injury or property damage. NOTE: is used to notify people of important installation, operation, or maintenance information. WARNING WARNING WARNING...
  • Page 3 Low-Profi le Air Oil Drain Plug Fuel Filter Spark Plug Cleaner Dipstick Oil Fill Oil Filter Oil Cooler Heavy-Duty Air Air Cleaner Fuses Oil Fill/Dipstick Cleaner Housing Dust Ejector Element Inner Element Retaining Clip Valve Plug or Filter End Cap Inlet Screen Ejector Area Minder...
  • Page 4 2. Check fuel level. Add fuel if low. Check fuel start engine until condition is corrected. Do system components and lines for leaks. not jump start. See your Kohler authorized dealer for trouble analysis. 3. Check and clean cooling areas, air intake areas and external surfaces of engine (particularly after storage).
  • Page 5 ● Replace heavy-duty air cleaner element and check inner element. Every 300 Hours ● Change oil and fi lter (KOHLER PRO 10W-50 oil and KOHLER PRO fi lter only). Every 500 Hours or Annually¹ ● Replace spark plugs and set gap.
  • Page 6 fi lter material. High pressure fuel line meeting SAE R12 4. Apply a thin fi lm of clean oil to rubber gasket standard must be installed on Kohler Co. on new fi lter. engines equipped with an EFI system.
  • Page 7 3. Saturate precleaner with new engine oil; authorized dealer for all maintenance, service, squeeze out excess oil. and engine parts. To fi nd a Kohler authorized 4. Reinstall precleaner over paper element. dealer visit KohlerEngines.com or call 1-800- 544-2444 (U.S. and Canada).
  • Page 8: Troubleshooting

    If engine will be out of service for 2 months or more follow procedure below. 1. Add Kohler PRO Series fuel treatment or equivalent to fuel tank. Run engine 2-3 minutes to get stabilized fuel into fuel system (failures due to untreated fuel are not warrantable).