Kidde VM-1 User Manual page 19

Figure 9: VM-PMI with VM-MFK Firefighters Telephone
(1) (2)
Table 4: VM-PMI with VM-MFK controls and indicators
Item Control/Indicator
1 Push-to-talk (PTT)
2 Paging microphone
3 Telephone handset
4 All Call
5 Page To Evac
6 Page by Phone
7 Buzzer Silence
8 Page To Alert
VM-1 User Guide
(3)
Paging Microphone
Paging Ready To
All Call
Volume Page
All Call
Minus
(11) (10) (9)
Description
Pressing the PTT button lets you to broadcast live voice messages.
Handheld microphone used to broadcast live voice messages.
Handset used to communicate with dedicated firefighter telephone
stations that are strategically located throughout the facility.
Pressing the All Call button broadcasts a live voice message
throughout the facility. Pressing the button a second time exits the
All Call mode. The LED turns on when the system is in All Call
mode.
Pressing the Page To EVAC button broadcasts a live voice message
to areas configured to receive evacuation signals. Pressing the
button a second time exits the Page To EVAC mode. The LED turns
on when the system is in Page To EVAC mode.
Pressing the Page by Phone button allows you to broadcast live
voice messages using the telephone handset instead of the paging
microphone.
Pressing the Buzzer Silence button silences the phone call-in
buzzer.
Pressing the Page To Alert button broadcasts a live voice message
to areas configured to receive alert signals. Pressing the button a
second time exits the Page To Alert mode. The LED turns on when
the system is in Page To Alert mode.
Firefighters Phone
Page Page By
To EVAC Phone
Page Buzzer
To Alert Silence
(8)
Chapter 1: Introduction
(4)
(5)
(6)
(7)
9