Kidde VM-1 User Manual page 16

Chapter 1: Introduction
Figure 5: Common Controls keypad details
Table 2: Common Controls keypad
Item Control/Indicator
1 ACK/Panel Silence
button and LED
2 Alarm Silence
button and LED
3 Reset button and
LED
4 Drill button and
LED
5 Details button
6
Description
Pressing the button acknowledges an active event. The LED
indicates that the panel is in an off-normal condition and that the
panel has been placed in Panel Silence mode.
Pressing the button silences all audible alarm signals and, if
configured, all visible alarm signals. The LED indicates that the
active notification circuits have been silenced.
WARNING: Risk of death or serious injury. The protected premises
may be occupied. Do not reset the fire alarm system until the proper
authorities have determined that the threat of fire is no longer
present.
Pressing the button restores the system to the normal state. The
LED turns on during the reset process.
Pressing the button activates the drill command function. The LED
turns on while the drill is active. Pressing the button a second time
stops the drill.
Pressing the button displays additional information about the event
highlighted on the LCD screen.
VM-1 User Guide