Kidde VM-1 User Manual page 15

Figure 4: System status indicators detail
Table 1: System status indicators
Item Indicator
1 Power
2 Test
3 Ground Fault Indicates that a ground fault was detected in the system wiring.
4 Monitor
5 Service
Detector
6 Alarm
7 Supervisory
8 Trouble
9 Disable
10 CPU Fail
VM-1 User Guide
Description
Indicates the primary (AC) power status. The LED is on when the panel
has primary power. The LED is off when the panel does not have primary
power or when another panel in the life safety network does not have
primary power.
Indicates that a part of the system is in test mode.
Flashes when there is an active monitor event and is steady once the
event is acknowledged.
Indicates when a detector needs servicing.
Serves as a common alarm event indicator.
Serves as a common supervisory event indicator.
Serves as a common trouble event indicator.
Indicates when a device, card, group, time control, switch, or LED has
been manually disabled.
Indicates that the VM-CPU module has detected a processor failure.
Chapter 1: Introduction
5